
Duct Sealing: Signs, DIY Steps & Rebates in TX and OK
Short answer: Duct sealing closes the leaks, holes and loose connections in the ductwork that carries cooled and heated air through your home. ENERGY STAR says a typical house loses about 20 to 30 percent of the air moving through its ducts that way. If your ducts run through a hot Texas or Oklahoma attic, that lost air is especially expensive. You can seal the ducts you can reach with mastic or metal tape. For a full fix, a tested professional job may qualify for a utility rebate in Austin, OG&E territory (income-qualified) and Georgia Power territory.
No cost to check · No obligation · About 2 minutes
Last checked November 2, 2026. Program terms come from each utility's own page. The utility decides eligibility.
Signs you need air duct sealing
ENERGY STAR lists these signs of poorly performing ducts:
- High summer and winter utility bills
- Rooms that are hard to heat or cool
- Stuffy rooms that never feel comfortable
- Ducts located in an attic, crawlspace or garage
- Tangled or kinked flexible ducts
DOE adds that ducts leaking into an attic or crawl space "can add hundreds of dollars a year" to heating and cooling bills. DOE also notes that unsealed joints on the return side can pull unconditioned air into the system.
How to seal ductwork you can reach (DIY)
ENERGY STAR and DOE describe the same basic approach:
- Find the accessible runs. Check the attic, crawlspace, garage and unfinished areas. Start where the ducts connect to the air handler and where branches split off.
- Seal joints and holes with mastic sealant or metal (foil) tape. ENERGY STAR says never to use ordinary duct tape, because it doesn't last.
- Seal the boots. Make sure the connections at vents and registers are sealed where they meet the floor, wall or ceiling. ENERGY STAR calls these common leak spots.
- Insulate ducts in unconditioned spaces. DOE calls insulating and sealing ducts in unconditioned spaces "usually very cost effective."
- Fix the simple stuff. DOE says you can often fix discomfort by clearing blocked registers, unsticking dampers, and reconnecting or repairing damaged ducts.
Safety note: DOE says all duct sealing should be tested by a qualified professional to ensure combustion safety and proper airflow.
Professional duct sealing: what to expect
A contractor typically tests the duct system for leakage, seals the leaks, then retests. Rebate programs often require that before-and-after proof. Georgia Power, for example, requires duct testing and a 30% or greater reduction in measured leakage (CFM25). Ask for the test numbers in writing.
Duct sealing cost
Duct sealing cost depends on how much ductwork is reachable, how leaky it is and whether ducts need repair or replacement. We haven't found an official price benchmark. Get a written quote that lists the test-in result, the work and the target leakage reduction, then compare it with the rebate rules below.
Rebates that may help with duct sealing (checked Nov 2, 2026)
Texas
- Austin Energy: $0.20 per sq ft of floor area for air infiltration and duct sealing, which is a required measure in Home Energy Savings. Austin also lists $3.25 per linear foot for duct replacement and $1.00 per linear foot to insulate existing ducts. A participating contractor and at least three upgrades are required. Austin Energy rebates
- Oncor (DFW area): 2026 efficiency funding is exhausted. Oncor says to check back in January 2027. Oncor rebates
Oklahoma
- OG&E: income-qualified customers may receive "air duct and seal repair," air sealing and other upgrades at no additional cost, as part of up to $3,000 in improvements. OG&E rebates
- PSO: income-qualified Home Weatherization Assistance, with an assessment first and the approved upgrades at no cost. PSO rebates
Georgia
- Georgia Power: 50% of the cost, up to $600 for electric systems or $500 for gas. Most of the ducts must be in unconditioned space, and the work requires duct testing and a 30%+ leakage reduction. A Home Comfort Bundle (attic insulation + air sealing + duct sealing) pays 50% up to $1,700 electric or $1,400 gas. Georgia Power rebates
Amounts can change, and funds can run out. Your utility decides eligibility.
Seal ducts and the attic together
If your ducts are in the attic, sealing them and adding attic insulation in the same project makes sense. Both Austin Energy and Georgia Power structure their programs around combined work. See attic insulation cost and our insulation rebates by state.
The bottom line
Duct sealing is one of the less visible upgrades, but ENERGY STAR's 20–30% loss figure shows why it matters in a hot climate. Seal what you can reach, have the rest tested, and check whether a program may cover part of the job.
No cost to check · No obligation · About 2 minutes
FAQ
How much air do leaky ducts lose?
ENERGY STAR says about 20 to 30 percent of the air that moves through a typical home's duct system is lost to leaks, holes and poorly connected ducts.
Can I use duct tape to seal ducts?
No. ENERGY STAR says to use mastic sealant or metal tape and never duct tape, because duct tape isn't long-lasting.
Is duct sealing worth it?
DOE says leaky ducts in an attic or crawl space can add hundreds of dollars a year to heating and cooling bills, and calls sealing and insulating them usually very cost effective.
Are there rebates for duct sealing in Texas or Oklahoma?
As of November 2, 2026, Austin Energy pays $0.20 per sq ft through Home Energy Savings, and OG&E's income-qualified program includes duct repair and sealing at no additional cost. Oncor's 2026 funds are exhausted. The utility decides eligibility.
Do I need a professional for duct sealing?
You can seal accessible ducts yourself, but DOE recommends that a qualified professional test all duct sealing for combustion safety and airflow, and most rebates require before-and-after testing.