Worker blowing insulation into a home attic

Attic Insulation Cost & Rebates in Texas and Oklahoma

November 03, 2026•5 min read

Short answer: Attic insulation cost depends mainly on your attic's square footage, how much insulation is already there and how high you're building it up. The U.S. Department of Energy and ENERGY STAR recommend R-49 to R-60 for an uninsulated attic in climate zones 2 and 3, which cover most of Texas, Oklahoma and Georgia. Utility rebates in all three states may pay part of the job, but each has rules on starting and finished depth. Get your quote written to match them.

Find My Rebates →

No cost to check · No obligation · About 2 minutes

Last checked November 2, 2026. Program terms come from each utility's own page. The utility decides eligibility.

What drives attic insulation cost

We haven't found an official national price benchmark, and quotes vary by market. These are the factors that move the number:

  1. Square footage of the attic floor. Most rebates are also figured per square foot or capped per home.
  2. Starting depth. Topping up 3–4 inches costs less than starting from bare joists. ENERGY STAR recommends less added R-value if you already have 3–4 inches.
  3. Target R-value. See the table below.
  4. Material and method. Loose-fill (blown-in) insulation conforms to attics with wires, ducts and pipes, according to DOE. That's one reason blown-in insulation cost is the number most homeowners compare. Batts and spray foam price differently.
  5. Prep work. Air sealing first, an insulated cover for the attic stairs and baffles at the eaves all add cost, but also performance.

How much attic insulation do I need?

ENERGY STAR's retrofit recommendations for adding attic insulation:

Climate zone Where (examples) Uninsulated attic Already have 3–4 inches
2 Houston, San Antonio, Austin, Dallas County; south Georgia R-49 R-38
3 Most of Oklahoma (incl. Oklahoma City and Tulsa); metro Atlanta R-49 R-38
4 Texas and Oklahoma Panhandles; northern Oklahoma counties such as Kay, Osage, Washington and Garfield R-60 R-49

The county examples come from DOE's Pacific Northwest National Laboratory county guide. Check your county before you get a quote. For more on R-values, see our R-value chart guide.

How to get a rebate-ready attic quote

  1. Check your utility's rules first. Note the required starting depth, the finished R-value and whether a program contractor is required.
  2. Measure what you have. Use a ruler in a few spots. OG&E's guidelines, for example, require existing insulation under 8 inches (R-23).
  3. Ask for air sealing in the same visit. Georgia Power strongly recommends it with attic insulation, and some programs bundle it.
  4. Make sure the invoice shows the details: installation date, square footage, R-value added, product and payment. OG&E rejects applications if the invoice doesn't match the application.
  5. File on time. OG&E's Oklahoma attic rebate needs the invoice and application by December 1 of the program year.

Rebates that may help with attic insulation (checked Nov 2, 2026)

Texas

  • CPS Energy (San Antonio): up to $0.35 per sq ft of attic. CPS Energy rebates
  • Austin Energy: attic insulation to R-38 through Home Energy Savings, paid at attic sq ft × $0.03 × R-value added, plus a $45 setup fee. A participating contractor and at least three qualifying upgrades are required. Example of the formula: adding R-19 to a 1,500 sq ft attic works out to 1,500 × $0.03 × 19 + $45 = $900. Your contractor confirms the actual amount. Austin Energy rebates
  • Oncor (DFW area): 2026 funding is exhausted. Oncor says to check back in January 2027. Oncor rebates

Oklahoma

  • OG&E: up to $500 for an existing single-family home at least 10 years old. Existing insulation must be under R-23, the finished attic must reach R-38 or more, and a professional insulation company must install it. As of November 2026, OG&E's Oklahoma attic insulation rebate is open, with applications due December 1. Window and door rebates are closed until 2027. OG&E rebates
  • PSO: income-qualified Home Weatherization Assistance (household income of $65,000 or less, home under 2,200 sq ft and at least 10 years old), with upgrades at no cost. PSO rebates

Georgia

  • Georgia Power: 50% of the cost, up to $300 for electrically heated homes or $200 for gas-heated homes. Existing insulation must be under R-19, and you must add R-49 or more. Radiant barriers don't qualify. Georgia Power rebates

Amounts can change, and funds can run out. Your utility decides eligibility.

Is attic insulation worth it in a hot climate?

In a Texas or Oklahoma summer, a thin attic lets heat soak into the rooms below, and ENERGY STAR lists ducts running through an attic as a common sign of duct losses. DOE says heating and cooling make up about 32% of a typical home's energy use. Air sealing plus insulation can cut heating and cooling costs, and DOE's guide puts air-sealing savings alone at 10–20%. Pair insulation with duct sealing if your ducts are in the attic.

The bottom line

Your attic insulation cost comes down to square footage, starting depth and target R-value. In San Antonio, Austin, OG&E territory and Georgia Power territory, a rebate may cover part of it. Match your quote to the program's rules before you schedule.

Find My Rebates →

No cost to check · No obligation · About 2 minutes

FAQ

How much does attic insulation cost?

It depends on attic size, existing depth and target R-value, and quotes vary by market. Ask for a per-square-foot price and the R-value added, then subtract any utility rebate. For example, CPS Energy lists up to $0.35 per sq ft.

How much attic insulation do I need in Texas?

ENERGY STAR recommends R-49 for an uninsulated attic in zones 2 and 3, or R-38 if you already have 3 to 4 inches. The Texas Panhandle is zone 4, where the recommendation for an uninsulated attic is R-60.

Does OG&E give a rebate for attic insulation?

OG&E lists up to $500 for Oklahoma customers whose existing insulation is under R-23, if the finished attic reaches R-38 or more. As of November 2026, OG&E's Oklahoma attic insulation rebate is open, with applications due December 1. Window and door rebates are closed until 2027.

Is blown-in or batt insulation better for an attic?

DOE notes that loose-fill (blown-in) insulation conforms to attics with wires, ducts and pipes, which suits most retrofit attics. Either can qualify for a rebate if it reaches the required R-value.

Do radiant barriers count as attic insulation for rebates?

Not for Georgia Power, which says reflective materials such as radiant barriers don't qualify for its attic insulation rebate. Check your own utility's rules.

blog author avatar

Upgrade Rebates Editorial Team

The Upgrade Rebates editorial team tracks utility and state energy-rebate programs across Texas, Oklahoma and Georgia, and checks every dollar figure against the program's own published pages before it goes on the site.

Back to Blog

Rebate budgets are first-come, first-served.

Pick your state for the programs your utility is paying right now — then check your ZIP in two minutes, no credit impact.

Independent service. Upgrade Rebates is not a government agency or utility. Program administrators determine eligibility, funding, and award amounts.