High-efficiency HVAC system outside a home

How Much Is a Heat Pump in Texas? Costs & Rebates 2026

November 17, 2026•6 min read

Short answer: There is no single price for a heat pump in Texas, because the installed cost depends mostly on five things: system size in tons, efficiency tier (SEER2 and HSPF2), the condition of your ducts, electrical work, and what has to be removed. The fastest way to know your real number is to get three itemized quotes for the same size and efficiency, then subtract any utility rebate your home qualifies for. This guide gives you the worksheet to do that.

See if you qualify →
Quick to check · No obligation.

Last checked November 10, 2026. Utility and federal rules change. Confirm on each official page before you sign a contract.

Why we don't print a statewide price range

Online "average cost" numbers mix house sizes, climates and equipment tiers, and they age quickly. We only publish figures we can cite from an official source or real quotes, and no utility or federal page we checked publishes an installed price for Texas homes. Instead, here is what actually moves the price, so you can read a quote and spot where the money goes.

What sets the price

1. Size (tons)

Heat pumps are sized in tons of capacity. Bigger homes, west-facing glass, low attic insulation and leaky ducts all push the size up. A larger unit costs more to buy, and an oversized unit also short-cycles, which hurts comfort and humidity control in Texas summers.

Ask for: a written load calculation (often called Manual J) rather than "same size as the old one." If your home has had new windows, insulation or duct sealing since the last system went in, the right size may now be smaller.

2. Efficiency tier (SEER2 and HSPF2)

SEER2 measures cooling efficiency and HSPF2 measures heating efficiency. Higher tiers cost more up front and use less electricity. They also decide whether you clear a rebate program's minimum. For example, CenterPoint Energy says its HVAC incentives start at 15.2 SEER2, while the current Texas minimum standard is 14.0 SEER2 (CenterPoint).

Ask for: the AHRI certificate number for the exact outdoor unit and indoor coil combination. The matched rating is what programs check, not the outdoor unit alone. Look it up in the AHRI Directory.

3. Ducts

If your ducts leak, are crushed in the attic or were sized for a smaller system, the contractor may quote repairs, sealing or a partial replacement. That line can be a large share of the total. It is also often where comfort complaints come from. Our duct sealing guide explains the signs. Homes without ducts can use ductless mini-split heat pumps, which price differently by the number of indoor heads.

4. Electrical

Most heat pumps reuse the existing circuit, but some jobs need a new breaker, a disconnect, a larger wire run or backup heat strips. An all-electric home replacing an old heat-strip system may also be able to downsize the strips. Ask the contractor to list electrical work separately.

5. Removal and extras

Quotes may include removing old equipment, a new pad, a new thermostat, a condensate pump, permits and a labor warranty. None of these are optional to ask about. A cheap quote that leaves them out can end up costing more.

How to compare three quotes (worksheet)

Copy this table and fill one column per contractor. If a row is blank on a quote, ask about it before you compare totals.

Line itemQuote AQuote BQuote C
Size (tons) and load calculation provided?
Outdoor unit model and indoor coil/air handler model
AHRI certificate number
SEER2 / HSPF2 (matched rating)
Ductwork: inspect, seal, repair or replace
Electrical work
Backup heat strips (kW)
Thermostat
Removal, pad, permit
Labor warranty (years)
Participating contractor for your utility's program?
Rebate handled on the invoice or paid to you later?
Total before rebate
Rebate the contractor expects (with program name)
Total after rebate

Two rows matter most for Texas rebates. First, participating contractor. Several Texas programs only pay through enrolled contractors. Second, how the rebate is paid. CenterPoint, for example, says its incentives are applied directly to your installation invoice when you work with a participating contractor. Other programs pay after the job.

Rebates by Texas utility

Rebates are set by your electric utility, and in some areas also your gas utility. Check the official page for your area on the day you get quotes:

  • Oncor (Dallas–Fort Worth, North and West Texas): As of November 10, 2026, Oncor says 2026 funding for its Home Energy Efficiency and Low-Income Weatherization programs has been fully exhausted, and to check back for 2027 program updates (Oncor). Status: Oncor rebates.
  • CenterPoint Energy (Houston electric area): central A/C, heat pumps and mini-splits are eligible, starting at 15.2 SEER2, through participating contractors (CenterPoint). Details: CenterPoint rebates.
  • CPS Energy (San Antonio): CPS lists a Home Energy Rebate for heat pumps, separate from its central air rebate, under its STEP program (CPS Energy). Details: CPS Energy rebates.
  • Austin Energy: lists air conditioning rebates and whole-home Home Energy Savings rebates with 0% financing on its residential page (Austin Energy). Details: Austin Energy rebates.

Gas-side rebates, which are separate programs with their own rules, and contractor rules are covered in our Texas HVAC rebates guide. For every Texas program in one place, see Texas energy rebates, and for how heat pump programs compare across states, see heat pump rebates by state. Not sure whether you have a heat pump now? Use our four-check guide.

See if you qualify →
We match your address to the program your project may fit before you sign.

Federal tax credit status

The federal Energy Efficient Home Improvement Credit allowed up to $2,000 a year for qualified heat pumps. The IRS says the credit applies to improvements made through December 31, 2025 (IRS). It does not cover a heat pump installed in 2026. If a quote or ad still promises this federal credit for a new installation, ask the contractor to show the current IRS rule in writing.

Ways to lower the price without cutting corners

  • Right-size first. Insulation, air sealing or duct sealing before the replacement can shrink the unit you need. See our attic insulation cost guide.
  • Time it. A planned replacement gives you time to collect quotes and confirm program rules. An emergency replacement in August rarely does. Our guide on how long AC units last covers the signs a system is near the end.
  • Choose the tier the program asks for. Paying for a tier above the program minimum only makes sense if the operating savings justify it for your home.
  • Compare against gas heat honestly. If your home has gas, read heat pump vs furnace before deciding.

FAQ

How much does a heat pump cost in Texas?
It depends on size, efficiency tier, ductwork, electrical work and removal. We don't publish an average because no official source gives one for Texas. Get three itemized quotes for the same size and SEER2/HSPF2, then subtract the rebate your utility lists.

Is a heat pump more expensive than an AC?
The outdoor units are similar, and a heat pump replaces both the AC and the heat source. Compare full quotes for the system you would otherwise buy, including the furnace or heat strips.

Do Texas utilities offer heat pump rebates?
Several do, through their own programs. CenterPoint and CPS Energy list heat pumps on their official pages. Oncor's 2026 funding is exhausted as of November 10, 2026. Check your utility's page or let us check your address.

Can I still get the federal heat pump tax credit?
The IRS says the Energy Efficient Home Improvement Credit applies to improvements made through December 31, 2025, so a 2026 installation does not qualify.

What should be on a heat pump quote?
Size and load calculation, exact models, the AHRI certificate number, matched SEER2/HSPF2, ductwork, electrical, removal, warranty and how any rebate is handled.

Sources

Have quotes in hand, or about to? We check which programs your address and project may qualify for, so the rebate row on your worksheet is real.

See if you qualify →
Quick to check · No obligation.

Questions? Email [email protected].

blog author avatar

Upgrade Rebates Editorial Team

The Upgrade Rebates editorial team tracks utility and state energy-rebate programs across Texas, Oklahoma and Georgia, and checks every dollar figure against the program's own published pages before it goes on the site.

Back to Blog

Rebate budgets are first-come, first-served.

Pick your state for the programs your utility is paying right now — then check your ZIP in two minutes, no credit impact.

Independent service. Upgrade Rebates is not a government agency or utility. Program administrators determine eligibility, funding, and award amounts.